SL-IR3 Product Introduction
The Sealan High Speed Smart LTE /LTE-A Router (IR3) is a rugged cellular router offering state-of-the-art mobile connectivity for internet of things applications.
Industrial Application
- Remote Data Monitor and Control
- CCTV, security surveillance
- Water, gas and oil flow metering and schedule
- AMR (automatic meter reading)
- Power station monitoring and control
- Remote POS (point of sale) terminals, ATM
- Traffic signals monitor and control, Traffic info guidance
- Oil field, weather forecast, environmental protection, street
- lamp monitoring and control
- Early Warning of Mountain Torrent
- Fleet management
- Power distribution network supervision
- Central heating system supervision
- Weather station data transmission
- Hydrologic data acquisition
- Vending machine
- Vehicle logistics
- diagnostics controlling
- Parking meter and Taxi Monitor
- Telecom equipment supervision (Mobile base station, microwave or optical relay station)
Product Feature
Design for Industrial Application
- High-powered industrial cellular module
- High-powered industrial 32bits CPU
- Support low-consumption mode, including sleep mode, scheduled online/offline mode, scheduled power-on/power-off mode(optional)
- Housing: iron, providing IP30 protection.
- Power range:DC 6~30V
Stability and Reliability
- Support hard are and software WDT
- Support auto recovery mechanism, including online detect, auto redial when offline to make router always online
- Ethernet port : 1.5KV magnetic isolation protection
- RS232 port : 1.5KV ESD protection
- SIM/UIM port: 1.5KV ESD protection
- Power port : reverse-voltage and overvoltage protection
- Antenna port : lightning protection (optional)
Standard and Conveniene
- Support standard RS232、Ethernet and WIFI port that can connect to serial,Ethernet and WIFI devices directly
- Support standard WAN port and PPPOE protocol that can connect to ADSL directly
- Support intellectual mode,enter into communication state automatically when powered
- Provide management software for remote management
- Support several work modes
- Convenient configuration and maintenance interface (WEB or CLI)
- Support multiple WAN access methods, including Static IP,DHCP,L2TP,PPTP,PPPOE。
- Support link backup between Cellular network and WAN
- Support VPN client (PPTP/L2TP/IPSEC/GRE)
- Support local and remote firmware upgrade,import and export configure file
- Support NTP Client
- Support MAC Address clone
- WIFI support 802.11b/g/n, support WIFI AP/AP Client(Optional)
- WIFI support WPA/WPA2 encryption,Support MAC address filter。
- support APN/VPDN
- support DHCP Server and DHCP Client,DHCP static IP address,DDNS,firewall,NAT,DMZ host.
- Support TCP/IP、UDP、FTP(Optional),HTTP, POP3,QICQ, TELNET, FTP, SNMP, SSHD, etc(Optional)
Specification
Cellular Interface |
|
Cellular Interface |
1xMAIN |
Connector |
SMA, female |
SIM |
1x (3 V & 1.8 V) |
Ethernet Interface |
|
Number of ports5 |
5 x 10/100 Mbps or 4 x LAN + 1 x WAN |
WAN port |
1 |
Magnet isolation protection |
1.5KV |
WiFi Interface (optional) |
|
Number of antennas |
2 |
Connector |
RP-SMA, male |
Standards |
802.11 b/g/n supporting AP and Client modes |
Frequency band |
2.4 GHz |
Security |
WEP, WPA, WPA2 |
Encryption |
64/128 AES, TKIP |
Data speed |
2*2 MIMO, 300 Mbps |
Tx Power |
15dBm |
RF output power(+/-1 dBm) |
802.11b 19 dBm 802.11g 19 dBm 802.11n (20 MHz) 18 dBm 802.11n (40 MHz) 17 dBm |
Receiving sensitivity (+/-1 dBm) |
802.11b -93 dBm 802.11g -90 dBm 802.11n (20 MHz) -88 dBm 802.11n (40 MHz) -85 dBm |
Hardware System |
|
CPU |
Industrial 32bits CPU |
FLASH |
128Mbit |
SDRAM/DDR |
DDR2 1024Mbit |
Inteface Type |
|
WAN |
1 10/100M WAN port(RJ45),Auto MDI/MDIX,1.5KV magnetic isolation protection |
LAN |
4 10/100M LAN port(RJ45),Auto MDI/MDIX,1.5KV magnetic isolation protection |
Serial |
1 RS232 Port,15KV ESD protection Data bits:5、6、7、8 Stop bits:1、2 Parity:none,even,odd,space,mark Baud rate:2400~115200bit/s |
Antenna |
Cellular: 2 Standard SMA female interface, 50 ohm WIFI: 2 Standard SMA female interface, 50 ohm |
Reset button |
1xRSTERT |
LED indicators |
1xSYS 1xVPN 1xSIGNAL 1XCELL 1xWiFi 4xLAN 1xWAN |
Built-in |
Watchdog |
Software |
|
Network protocol |
PPP,PPPoE,TCP,UDP,DHCP, ICMP,NAT,HTTP,HTTPs,DNS,ARP, NTP,SMNP,Telnet,VLAN,SSH2, DDNS,etc… |
VPN tunnel |
IPSec GRE L2TP PPTP Client PPTP Server |
Firewall |
DMZ,anti-Dos, Filtering(IP/Domain name/MAC address), Port Mapping, Access Control |
Management |
Web,Client,Cloud |
Power Supply |
|
Input voltage |
6 to 30V DC |
Power consumption |
Idle: 450mA@12V |
Physical Characteristics |
|
Ingress protection |
IP30 |
Housing & Weight |
Metal, 650g |
Dimensions |
191x112x30mm |
Regulatory and Type Approvals |
|
Regulatory |
CE,CCC |
Environmental |
RHoS |
EMI |
EN 55032: 2012/AC: 2013 (CE & RE) Class A |
EMS |
IEC 61000-4-2 (ESD) Contact Level 2 Air Level 3IEC 61000-4-4 (EFT) Level 2 IEC 61000-4-5 (Surge) Level 3 |